Gate - Self-closing, One-way Opening Gate

Date published: 17 February, 2022

For recent changes to this guidance, please see the bottom of the page.

Aim

To be used to enable access where a path crosses a field boundary such as fences or walls. Provides a robust, accessible and easy to use self-closing gate, suitable for multi-use. A one-way opening gate is less preferable than a two-way gate, but it can be used to manage access at the roadside and/or livestock pressures.

Eligibility

Any land is eligible, and the gate should be on an existing, upgraded or new path.

Requirements

Galvanised steel gate:

1.2m height from ground level.
1.5m minimum width of opening.
Made of galvanised steel H-frame, set in concrete to 0.7m depth.
Self-closing hinges or equivalent self-closing mechanism.
Easy-operation latch.
Gate stop.

Timber gate:

1.2m height from ground level.
1.5m minimum width of opening.
Hanging post and shutting post min 2440mmx150mmx150mm.
Set in rammed stone and earth or concrete min 0.7m deep.
Self-closing hinges or equivalent self-closing mechanism.
Gate uprights min 75mmx75mm.
Easy-operation latch.
Gate stop

Additionally:

Surfaces through gates must tie in with path, be firm, level and well drained.
Where one-way opening gates are installed adjacent to roads they should open away from the road.
Where one-way opening gates are installed adjacent to a field or area with livestock they should open into the side used by livestock.
Gate must self-close.
Photographic evidence: You must keep a photographic record of the gate installation showing works below ground level.

Payment

You can claim £350 each.

Inspections

The inspectors will check:

The location and extent of the work as is detailed in the contract schedule of works and contract map.
That the capital item requirements have been met as detailed above.
That photographic evidence has been provided as detailed above.