Cross Compliance inspection control report forms
This is an old version of the page
This is an old version of the page
Date published: 14 October, 2015
Date superseded: 22 October, 2016
Cross Compliance inspections are made up of seven inspection tasks and each of these are covered by a separate control report form (CRF).
During a Cross Compliance inspection, the RPID inspector will record the results onto the relevant CRFs. The RPID inspector must complete two mandatory CRFs, which include the ‘GAEC and Core SMR CRF’ and the ‘Food and Feed law CRF’. The remaining five CRFs will only be completed by the inspector if these areas are applicable to the business selected for a cross compliance inspection.
In addition, a SSAFO inspection is also completed at the time of a cross compliance inspection. This is carried out on behalf of SEPA and the RPID inspector will record the results onto the SSAFO CRF.
The table below provides you with the CRFs that RPID inspectors use when carrying out Cross Compliance inspections.
| Name | Form |
|---|---|
| GAEC and Core SMR CRF (GAEC 1-7 and SMR 2, 3 and 9) and inspection task record | GAEC and core SMR CRF 2015 |
| Food and feed law (F&F) (SMR 4) CRF | Food and feed law CRF 2015 |
| Plant protection product (PPP) (SMR 10) CRF | Plant protection CRF 2015 |
| Dairy hygiene (SMR 4) CRF | Dairy CRF 2015 |
| Nitrate Vulnerable Zone (NVZ) (SMR 1) CRF | NVZ CRF 2015 |
| Groundwater (GAEC 3) CRF | Groundwater CRF 2015 |
| Pig ID and traceability (SMR 6) CRF | Pig ID CRF 2015 |
| Silage, slurry and agricultural fuel oil (SSAFO) CRF | SSAFO CRF 2015 |